TP-LINK MC110CS
Fast Ethernet Media Converter

TP-LINK MC110CS

TP-Link Products

TP-LINK Media Converter

TP-LINK MC110CS Fast Ethernet Media Converter

#MC110CS
Get a Quote!

Overview:

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19'' system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, supports both 5VDC and 9VDC external power supply and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.4 miles).

Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
Extends fiber distance up to 20km (12.4 miles)

Features:

Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port
Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
Extend fiber distance up to 20km (12.4 miles)
Easy-to-view LED indicators provide status to monitor network activity easily
Supports both 5VDC and 9VDC external power supply

Specifications:

MC110CS Specifications
Standards and Protocols	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Basic Function	Half/Full-Duplex transfer mode for FX port Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 20km Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
Ports	1 100M SC/UPC port 1 100M RJ45 port (Auto MDI/MDIX)
Wave Length	1310nm
Network Media 10BASE-T	UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
Network Media 100BASE-T	UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
Network Media 100BASE-FX	Single-mode Fiber
LED Indicators	PWR, FDX/Col, Link/Act, SPD
Dimensions ( W x D x H )	3.7 x 2.9 x 1.1 in. (94.5 x 73.0 x 27.0 mm)
Power Supply	External power supply
Max Power Consumption	1.52W
Safety & Emission	FCC, CE, RoHS
Environment	Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Compare:

Model	MC100CM	MC110CS	MC111CS	MC112CS	MC200CM	MC210CS	MC220L
Interface	RJ45--SC	RJ45--SC	RJ45--SC	RJ45--SC	RJ45--SC	RJ45--SC	RJ45--SFP
Transmission Distance	2km	20km	20km	20km	0.55km(50/125um), 0.22km(62.5/125um)	15km	0.55km /10km
Transmission Media	Multi-mode Fiber,TP	Single-mode Fiber,TP	Single-mode Fiber,TP	Single-mode Fiber,TP	Multi-mode Fiber,TP	Single-mode Fiber,TP	Multi/Single-mode Fiber, TP
Wave Length	1310nm	1310nm	1550nmTX/ 1310nmRX	1310nmTX/ 1550nmRX	850nm	1310nm	Depend on used SFP module

Documentation:

Download the TP-LINK Media Converters & Chassis Datasheet (PDF).